Materials

Find out about our polymer grades

At Polynext, we are convinced it is not always the most expensive material that is the most suitable for all applications: rather, it is necessary to find the one whose mechanical, ecological, and economic yield is the most efficient for a specific application. Therefore, according to the requirements of the product and/or application, it is possible to select from various options and kinds of material depending on the polymer required.

MIX

r MIX

rMIX es un grado basado en una mezcla PP/PE, mayoritaria en PP, procedente de post-consumo, filtrado a 250 mm. Color gris, llevado a negro. Otros micrajes de filtrado y colores disponibles a petición. Desarrollado para aplicaciones de moldeo por inyección de artículos que requieran buena procesabilidad y acabado superficial.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190 °C / 2,16 kg) 14 - 16 g/10 min
Density ISO 1183 0,92 - 0,94 g/cm3
Shore D hardness ISO 868 61 - 63 -

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527-2/1A/1 1.100 - 1.200 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 24 - 26 MPa
Elongation at break to traction ISO 527-2/1A/50 >30 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA 2 - 3 kJ/m2

- Todas las propiedades, salvo el MFI, están determinadas sobre probetas ISO tipo 1-A obtenidas por moldeo por inyección.

- Los Valores Típicos son valores medios representativos.

Disclaimer:
Este producto es un material reciclado. Aunque las materias primas empleadas presentan homogeneidad y regularidad, las propiedades y/o el comportamiento del material pueden variar. Así, los valores indicados en esta ficha técnica no deben tomarse como especificaciones. Son proporcionadas de buena fe, si bien Polymer Recycling Labs, S.L. no ofrece garantías ni asumirá ninguna responsabilidad por la información contenida en este documento, que es válida y fidedigna a partir de la fecha de publicación.

La responsabilidad referente a la seguridad y a la legalidad del uso, el manejo y el procesamiento de este material recae sobre el Comprador, quien será igualmente responsable de determinar si el material y la información contenida en esta ficha son apropiados para la aplicación en la que el Comprador lo utilice.

POLYPROPYLENE

r PP-V

rPP-V is a grade based on polypropylene from mixed sources, filtered at 250 mm. May have some polyethylene content. Black colour. Other filter fineness available at request. Developed for injection moulding applications.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190 °C / 2,16 kg) 4-5 g/10 min
Density ISO 1183 0,94 - 0,96 g/cm3
Shore D hardness ISO 868 60 - 62 -

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527-2/1A-1 900-1000 MPa
Resistance at the tensile yield point ISO 527-2/1A/1 20-22 MPa
Elongation at break to traction ISO 527-2/1A/50 >30 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA >4 kJ/m2

- All properties, except MFI tests, are conducted on ISO type 1-A injection moulded test specimens.

- Typical Values are representative mean values.

Disclaimer:
This product is a recycled grade. Although raw materials are regular and homogeneous, material properties and/or performance may vary. Hence, values indicated in this datasheet are not to be construed as specifications. They are provided in good faith, but no guarantees are given and no responsibility is assumed by Polymer Recycling Labs, S.L. for the information in this document, which is accurate and reliable as of the date of publication.

The responsibility for safe and legal use, handling and processing of this material relies on the Customer, who is also responsible for determining whether the material and the information in this document are appropriate for the Customer’s use.

© 2018 POLYMER RECYCING LABS, S.L.

r PP-GLM

rPP-GLM is a compound based on post-consumer polypropylene, filtered at 250 mm. Light grey colour. Other colours and filter fineness available at request. Developed for injection moulding applications where colourability, good processability and good article finish are required, with improved mechanical performance, as: Crates & boxes Pallets Household articles Buckets, pails and bins Flowerpots Furnishings Caps & closures Catch basins

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190 °C / 2,16 kg) 9 - 11 g/10 min
Density ISO 1183 0,91 - 0,92 g/cm3
Shore D hardness ISO 868 61 - 63 -

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 1050 - 1150 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 23 - 25 MPa
Elongation at break to traction ISO 527-2/1A/50 >30 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA >5 kJ/m2

- All properties, except MFI tests, are conducted on ISO type 1-A injection moulded test specimens.

- Typical Values are representative mean values.

This product is a recycled grade. Although raw materials are regular and homogeneous, material properties and/or performance may vary. Hence, values indicated in this datasheet are not to be construed as specifications. They are provided in good faith, but no guarantees are given and no responsibility is assumed by Polymer Recycling Labs, S.L. for the information in this document, which is accurate and reliable as of the date of publication.
The responsibility for safe and legal use, handling and processing of this material relies on the Customer, who is also responsible for determining whether the material and the information in this document are appropriate for the Customer’s use.

r PP-MC

rPP-MC is a grade based on polypropylene, with balanced homopolymer and copolymer contents from post-consumer and post-industrial sources. Filtered at 250 mm, other filter fineness available at request. Black colour. Developed for injection moulding applications where a good balance between stiffness and toughness is required, with good processability.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190 ºC / 2,16 kg) 12 - 14 g/10 min
Density ISO 1183 0,93 - 0,94 g/cm3
Shore D hardness ISO 868 60 - 62 -

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 1.100 - 1.200 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 21 - 23 MPa
Elongation at break to traction ISO 527-2/1A/50 >30 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA >6 kJ/m2

- All properties, except MFI tests, are conducted on ISO type 1-A injection moulded test specimens.

- Typical Values are representative mean values.

Disclaimer:
This product is a recycled grade. Although raw materials are regular and homogeneous, material properties and/or performance may vary. Hence, values indicated in this datasheet are not to be construed as specifications. They are provided in good faith, but no guarantees are given and no responsibility is assumed by Polymer Recycling Labs, S.L. for the information in this document, which is accurate and reliable as of the date of publication.

The responsibility for safe and legal use, handling and processing of this material relies on the Customer, who is also responsible for determining whether the material and the information in this document are appropriate for the Customer’s use.

© 2018 POLYMER RECYCING LABS, S.L.

r PP-C

rPP-C is a grade based on post-industrial polypropylene copolymer from automotive industry, filtered at 250 mm. Other filter fineness available at request. Black colour. Developed for injection moulding applications where great toughness is required, together with good stiffness and processability.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190 ºC / 2,16 kg) 10 - 12 g/10 min
Density ISO 1183 0,95 - 0,97 g/cm3
Shore D hardness ISO 868 56 - 58 -

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 1.150 - 1.250 MPa
Resistance at the tensile yield point ISO 527‐2/1A/50 18 MPa
Elongation at break to traction
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA > 30 kJ/m2

- All properties, except MFI tests, are conducted on ISO type 1-A injection moulded test specimens.

- Typical Values are representative mean values.

Disclaimer:
This product is a recycled grade. Although raw materials are regular and homogeneous, material properties and/or performance may vary. Hence, values indicated in this datasheet are not to be construed as specifications. They are provided in good faith, but no guarantees are given and no responsibility is assumed by Polymer Recycling Labs, S.L. for the information in this document, which is accurate and reliable as of the date of publication.

The responsibility for safe and legal use, handling and processing of this material relies on the Customer, who is also responsible for determining whether the material and the information in this document are appropriate for the Customer’s use.

r PP-AF

rPP-AF is a grade based on high MFI polypropylene, filtered at 250 mm. Other filter fineness available at request. Black colour. Developed for injection moulding applications where good processability is required, together with good stiffness and article finish

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190ºC / 2,16 kg) 18 - 20 g/10 min
Density ISO 1183 0,91 - 0,93 g/cm3
Shore D hardness ISO 868 63 - 65 -

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 1.100 - 1.200 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 24 - 26 MPa
Elongation at break to traction
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA > 3 kJ/m2

- All properties, except MFI tests, are conducted on ISO type 1-A injection moulded test specimens.

- Typical Values are representative mean values.

Disclaimer:
This product is a recycled grade. Although raw materials are regular and homogeneous, material properties and/or performance may vary. Hence, values indicated in this datasheet are not to be construed as specifications. They are provided in good faith, but no guarantees are given and no responsibility is assumed by Polymer Recycling Labs, S.L. for the information in this document, which is accurate and reliable as of the date of publication.

The responsibility for safe and legal use, handling and processing of this material relies on the Customer, who is also responsible for determining whether the material and the information in this document are appropriate for the Customer’s use.

r PP-GL

rPP-GL is a grade based on post-consumer polypropylene, filtered at 250 m. Light grey colour. Other colours and filter fineness available at request. Developed for injection moulding applications where colourability, good processability and good article finish are required, as: Crates and boxes, Pallets, Household articles, Buckets, pails and bins, Flowerpots, Furnishings, Caps & closures, Catch basins.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190 °C / 2.16 kg) 9 - 11 g/10 min
Density ISO 1183 0.91 – 0.92 g/cm3
Shore D hardness ISO 868 61 - 63 -

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527-2/1A/1 1,050 – 1,150 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 23 - 25 MPa
Elongation at break to traction ISO 527-2/1A/50 > 20 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA > 3.5 kJ/m2

All properties, except MFI tests, are conducted on ISO type 1-A injection moulded test specimens.

Typical Values are representative mean values.

This product is a recycled grade. Although raw materials are regular and homogeneous, material properties and/or performance may vary. Hence, values indicated in this datasheet are not to be construed as specifications. They are provided in good faith, but no guarantees are given and no responsibility is assumed by Polymer Recycling Labs, S.L. for the information in this document, which is accurate and reliable as of the date of publication.
The responsibility for safe and legal use, handling and processing of this material relies on the Customer, who is also responsible for determining whether the material and the information in this document are appropriate for the Customer’s use.

POLYPROPYLENE WITH TALC

r PPT-h10

rPPT-h10 is a grade based on homopolymer polypropylene with 10 wt% talc. Filtered at 250 mm, other filter fineness available at request. Naturally greyish, coloured in black. Developed for injection moulding applications where good stiffness is required.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190 °C / 2,16 kg) 4 - 5 g/10 min
Density ISO 1183 0,99 - 1,00 g/cm3
Shore D hardness ISO 868 62 - 63 -

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 1.200 - 1.300 MPa
Resistance at the tensile yield point ISO 527‐2/1A/50 24 - 26 MPa
Elongation at break to traction ISO 527‐2/1A/50 > 300 %
Impact resistance Charpy with notch (23ºC) ISO 179‐1/1eA >3 kJ/m2

- All properties, except MFI tests, are conducted on ISO type 1-A injection moulded test specimens.

- Typical Values are representative mean values.

This product is a recycled grade. Although raw materials are regular and homogeneous, material properties and/or performance may vary. Hence, values indicated in this datasheet are not to be construed as specifications. They are provided in good faith, but no guarantees are given and no responsibility is assumed by Polymer Recycling Labs, S.L. for the information in this document, which is accurate and reliable as of the date of publication.

The responsibility for safe and legal use, handling and processing of this material relies on the Customer, who is also responsible for determining whether the material and the information in this document are appropriate for the Customer’s use.

r PPT-h10 AF

rPPT-h10 is a grade based on homopolymer polypropylene with 10 wt% talc. Filtered at 250 mm, other filter fineness available at request. Naturally greyish, coloured in black. Developed for injection moulding applications where good stiffness is required.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190 ºC / 2,16 kg) 10,5 - 11,5 g/10 min
Density ISO 1183 0,98 - 1,00 g/cm3
Shore D hardness ISO 868 62 - 63 -

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527-2/1A/1 1.350 - 1.450 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 24 - 26 MPa
Elongation at break to traction ISO 527-2/1A/50 >40 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA >3 kJ/m2

- All properties, except MFI tests, are conducted on ISO type 1-A injection moulded test specimens.

- Typical Values are representative mean values.

Disclaimer:
This product is a recycled grade. Although raw materials are regular and homogeneous, material properties and/or performance may vary. Hence, values indicated in this datasheet are not to be construed as specifications. They are provided in good faith, but no guarantees are given and no responsibility is assumed by Polymer Recycling Labs, S.L. for the information in this document, which is accurate and reliable as of the date of publication.

The responsibility for safe and legal use, handling and processing of this material relies on the Customer, who is also responsible for determining whether the material and the information in this document are appropriate for the Customer’s use.

© 2018 POLYMER RECYCING LABS, S.L.

r PPT-C10

rPPT-C10 is a grade based on post-industrial polypropylene copolymer from automotive industry, with 10 wt% talc. Filtered at 250 mm, other filter fineness available at request. Black colour. Developed for injection moulding applications where an optimum balance between stiffness, toughness, processability and density is required.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190 °C / 2,16 kg) 10 - 12 g/10 min
Density ISO 1183 1,00 - 1,02 g/cm3
Shore D hardness ISO 868 55 - 57 -

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527-2/1A/1 1.350 - 1.450 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 18 - 20 MPa
Elongation at break to traction ISO 527-2/1A/50 > 30 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA > 20 kJ/m2

- All properties, except MFI tests, are conducted on ISO type 1-A injection moulded test specimens.

- Typical Values are representative mean values.

Disclaimer:
This product is a recycled grade. Although raw materials are regular and homogeneous, material properties and/or performance may vary. Hence, values indicated in this datasheet are not to be construed as specifications. They are provided in good faith, but no guarantees are given and no responsibility is assumed by Polymer Recycling Labs, S.L. for the information in this document, which is accurate and reliable as of the date of publication.

The responsibility for safe and legal use, handling and processing of this material relies on the Customer, who is also responsible for determining whether the material and the information in this document are appropriate for the Customer’s use.

© 2018 POLYMER RECYCING LABS, S.L.

r PPT-C20

rPPT-C20 is a grade based on post-industrial polypropylene copolymer from automotive industry, with 20 wt% talc. Filtered at 250 mm, other filter fineness available at request. Black colour. Developed for injection moulding applications where great stiffness is required, together with good toughness and processability.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190 ºC / 2,16 kg) 9 - 11 g/10 min
Density ISO 1183 1,09 - 1,11 g/cm3
Shore D hardness ISO 868 56 - 58 -

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 1.800 - 1.900 MPa
Resistance at the tensile yield point ISO 527‐2/1A/50 18 - 20 MPa
Elongation at break to traction ISO 527‐2/1A/50 >20 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA >15 kJ/m2

- All properties, except MFI tests, are conducted on ISO type 1-A injection moulded test specimens.

- Typical Values are representative mean values.

Disclaimer:
This product is a recycled grade. Although raw materials are regular and homogeneous, material properties and/or performance may vary. Hence, values indicated in this datasheet are not to be construed as specifications. They are provided in good faith, but no guarantees are given and no responsibility is assumed by Polymer Recycling Labs, S.L. for the information in this document, which is accurate and reliable as of the date of publication.
The responsibility for safe and legal use, handling and processing of this material relies on the Customer, who is also responsible for determining whether the material and the information in this document are appropriate for the Customer’s use.

© 2018 POLYMER RECYCING LABS, S.L.

POLYETHYLENE HIGH DENSITY

r HDPE-I4

rHDPE-I4 is a grade based on HDPE from mixed sources. Melt-filtered at 250 mm, other filter fineness available at request. Black colour. Developed for injection moulding applications, as: Crates & boxes Pallets Buckets & Pails Dust bins Industrial articles

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190ºC / 2,16 kg) 3,5 - 4,5 g/10 min
Density ISO 1183 0,94 - 0,96 g/cm3
Shore D hardness ISO 868 58 - 60 -

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527-2/1A/A 800 - 900 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 22 - 24 MPa
Elongation at break to traction ISO 527-2/1A/50 >400 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA 4 - 5 kJ/m2

- All properties, except MFI tests, are conducted on ISO type 1-A injection moulded test specimens.

- Typical Values are representative mean values.

Disclaimer:
This product is a recycled grade. Although raw materials are regular and homogeneous, material properties and/or performance may vary. Hence, values indicated in this datasheet are not to be construed as specifications. They are provided in good faith, but no guarantees are given and no responsibility is assumed by Polymer Recycling Labs, S.L. for the information in this document, which is accurate and reliable as of the date of publication.

The responsibility for safe and legal use, handling and processing of this material relies on the Customer, who is also responsible for determining whether the material and the information in this document are appropriate for the Customer’s use.

© 2018 POLYMER RECYCING LABS, S.L.

r HDPE-ES

rHDPE-ES is a grade based on HDPE from post-consumer sources. Melt-filtered at 250 mm. Naturally coloured greenish grey. Other colours and filter fineness available at request. Developed for extrusion and blow moulding applications, as: Profiles, Telecommunication pipes, Corrugated pipes (single- and double-wall), Cables & wires, Bottles, Toys.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190º / 2,16 kg) 0.3 - 0.7 g/10 min
Density ISO 1183 0.94 - 0.96 g/cm3
Shore D hardness ISO 868 57 - 59 -

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527-2/1A/1 750 – 850 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 22 – 24 MPa
Elongation at break to traction ISO 527-2/1A/50 > 400 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA > 10 kJ/m2

This product is a recycled grade. Although raw materials are regular and homogeneous, material properties and/or performance may vary. Hence, values indicated in this datasheet are not to be construed as specifications. They are provided in good faith, but no guarantees are given and no responsibility is assumed by Polymer Recycling Labs, S.L. for the information in this document, which is accurate and reliable as of the date of publication.
The responsibility for safe and legal use, handling and processing of this material relies on the Customer, who is also responsible for determining whether the material and the information in this document are appropriate for the Customer’s use.

Do you need a formulation?

Do not hesitate to contact us if you wish to launch a study of your current materials and learn about a specific development.

Contact with us